QUICK ANSWER
What to do
Range Display Mode is under Audio and Display, then Instrument. Regenerative Braking is under Energy, then Energy Manager. Dynamic range uses recent consumption; High regeneration increases deceleration when you release the accelerator.
STEP BY STEP
Follow these steps
- 1
For the range estimate, open Settings, Audio and Display, Instrument, then Range Display Mode.
- 2
Choose Standard for the test-based estimate or Dynamic for an estimate based on available energy and current average consumption.
- 3
For regeneration, open Settings, Energy, Energy Manager, then Regenerative Braking.
- 4
Choose Standard for normal lift-off deceleration or High for stronger energy recovery and deceleration.
GOOD TO KNOW
Before you finish
- The vehicle remembers the selected range-display mode after it is powered off.
- Dynamic range changes with climate-control use, driving mode and driving habits.
- Avoid unnecessary acceleration and deceleration if you want to maximise efficiency.
OFFICIAL SOURCE
BYD Atto 3 Evo owner's manual
Checked against printed manual pages 97. The PDF opens at the corresponding document page where supported.