QUICK ANSWER
What to do
With the vehicle powered on, open Settings, select Drive and then Overhaul. Enable the front or rear wiper check function and the wipers move into the maintenance position.
STEP BY STEP
Follow these steps
- 1
Power the vehicle on and open Settings on the touchscreen.
- 2
Select Drive, then Overhaul.
- 3
Enable the relevant front or rear wiper check function.
- 4
For the front blades, raise the driver's wiper arm first and then the passenger side.
- 5
Press the blade's lock button, slide the blade out and fit the replacement in reverse order.
- 6
Lower each arm gently back onto the glass.
GOOD TO KNOW
Before you finish
- Inspect the blades for cracking or hardening at least every six months.
- Do not bend the blade or allow an unsupported arm to spring back against the windscreen.
OFFICIAL SOURCE
BYD Atto 3 Evo owner's manual
Checked against printed manual pages 67-68. The PDF opens at the corresponding document page where supported.